GE Vivid in, Service Manual

Page: 222 / 740

GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1 V
IVID
I
N AND
V
IVID Q
N S
ERVICE
M
ANUAL
3-154 Section 3-10 - Connectivity Setup
3-10-9-3-4 Stopping & Running the Cine-Loop
When a loop is selected, it appears on the screen in Run-Mode .
There are several ways to stop a loop and view it frame-by-frame:
• Clicking on the
Freeze/Run
icon (#5 in Figure 3-162 ) will freeze the loop. Clicking on same icon
once again will run the loop again.
• Clicking on the
scrolling
icons (#6 in Figure 3-162 ) will stop the loop, allowing the user to advance
forwards or backwards to the required frame.
• Using the
left / right
arrows - when the loop is in Run-Mode , pressing either the
left
or
right
arrows
on the PC keyboard will freeze the loop. Further pressing the left or right arrows will advance the
loop frame-by-frame.
3-10-9-3-5 Selecting a Different Patient
Click on the
Back to Patient List
button (#13 in Figure 3-162 ). On the Patient List, click on the
Exam
Date
of the required patient.
3-10-9-3-6 Exporting Images or Loops from MPEGvue
Using the “Save As…” function, an image may be saved to any of the following file formats:
- .BMP
- .WMV (MPEG4)
- .JPEG
To save an image, click on the diskette icon (#8 in Figure 3-162 ). A Save As… dialog-box will appear,
allowing you to select the desired file format in which to save the image.
3-10-9-3-7 Performing Measurements on MPEGVue Images
The following measurements can be performed on MPEGVue images:
• Distance and area in 2D images
• Height, time, and slope in M-mode images
• Velocity and time in Doppler modes
In a 2D image:
1) Select the
Measurement
tool (#9 in Figure 3-162 ).
The distance measurement tool is automatically selected.
2) Perform the distance measurement.
3) To perform an area measurement, right-click on the image and select
Area
. Perform the area
measurement.
In Other Modes:
1) Select the
Measurement
tool (#9 in Figure 3-162 ).
2) Perform the measurement.
Note:
If the original image contains measurements that were taken and stored on the
Vivid i n/ Vivid q N scanner, those measurements will appear in the MPEGvue image. In
this case, additional measurements cannot be performed on that image.
Note:
Currently, the measurement function is not available on DICOM images/loops, any
secondary captured screens 3D images, or images with discontinuities.