GE Vivid in, Service Manual

Page: 561 / 740

GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1 V
IVID
I
N AND
V
IVID Q
N S
ERVICE
M
ANUAL
Chapter 8 - Replacement Procedures 8-33
8-3-2-4 TR32 and RFI Boards Removal Procedure
1) Remove the bearing handle, as described in the Bearing Handle Removal Procedure on page 8 - 3 .
2) Remove the Control Panel and Keyboard, as described in the Control Panel and Keyboard
Removal Procedure on page 8 - 9 .
3) Loosen the eight screws that secure the TR32 and RFI Boards to the Bottom Assembly, as shown
in Figure 8-37 below .
4) Remove the eight screws - see Figure 8-38 .
5) Disconnect the PCI cable flex (BEP-to-RFI) from the cable connector on RFI Board as shown in
Figure 8-37 Loosen Screws that Secure TR32 and RFI Boards to Bottom Assembly
Figure 8-38 Removing the Screws