GE H
EALTHCARE
D
IRECTION
FQ091013, R
EVISION
1
V
IVID
I
N
AND
V
IVID
Q
N S
ERVICE
M
ANUAL
Chapter 3 - System Setup
3-103
8.) Select
Internet Protocol (TCP/IP)
.
9.) Click the
Properties
button.
The Internet Protocol (TCP/IP) Properties dialog box opens.
10.)Activate the
Use the following IP address
check box.
11.)Type in the Vivid
i
n/ Vivid q N
IP address 10.0.0.1
.
Note:
The IP must be
different
from the IP address used for network computer.
12.)Type in the
Subnet mask 255.255.255.0.
Note:
The Subnet mask should be the
same
for both the network computer and the
Vivid
i
n/ Vivid q N.
13.)Click
OK
14.)Press the
Config
button on the control panel to close all windows and return to the regular scanning
mode.
NOTE:
The following steps are performed on the Network Computer.
1) On the network computer, access the Control Panel, as follows:
a.) Double-click on
My Computer
icon on desktop.
b.) Double-click on
Control Pane
l icon.
2) Double-click on
Network Connections
icon.
3) Double-click on
Local Area Connection
icon.
Figure 3-107 Internet Protocol (TCP/IP) Properties
Summary of Contents for Vivid in
Page 2: ......
Page 30: ...GE HEALTHCARE DIRECTION FQ091013 REVISION 1 VIVID I N AND VIVID Q N SERVICE MANUAL xxviii...
Page 739: ......
