GE Vivid E9, Service Manual

Page: 624 / 802

GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
8 - 290 Section 8-11 - Back End Processor (BEP) parts replacement
8-11-15 BEP6 to GFI and Card Rack Backplane Cable replacement
8-11-15-1 Preparations
When preparing for the replacement, you must perform the following steps:
1.) Power down the VIVID E9.
2.) Disconnect the
Mains Power Cable from the wall outlet.
3.) Disconnect all probes .
4.) Remove the Left Side Cover .
5.) Remove the BEP Cover .
a.) Loosen the BEP Cover’s fixing screw(s).
- On BEP6 there are two finger screws on the top of the BEP Cover.
b.) Tilt the top of the BEP Cover away from the BEP .
c.) Set the BEP Cover aside.