GE Vivid E9, Service Manual

Page: 553 / 802

GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
Chapter 8 - Replacement procedures 8 - 219
8-10-1 Front End parts overview
The table below list the positions of the cards. Position #1 is nearest the probe connectors (front of unit).
NOTE: The number of each card type depends on VIVID E9 model card version (P/N) and installed
options.
Figure 8-216 Cards in Front End rack
Table 8-6 FEP Cards per VIVID E9 sheet 1 of 2
CARD
POSITION ABBREVIATION CARD NAME
TOTAL NUMBER OF CARDS PER SYSTEM
BT’09 BT’11 BT’12
SW v108.x.x
SW v110.0.0
to v110.1.3
SW v110.1.4
(or higher) SW v112.0.x
1 RLY
RELAY BOARD
1x 1x 1x 1x
2 GRX64
ANALOG RECEIVER BOARD
1x 1x 1x 1x
3 GRX128
ANALOG RECEIVER BOARD
1x 1x 1x 1x
4 GTX-TLP192
TRANSMITTER BOARD
NOT USED NOT USED 1x 1x
5 GTX-TLP3
TRANSMITTER BOARD
4x
NOT USED NOT USED NOT USED
6 GTX-TLP3
TRANSMITTER BOARD
3x
NOT USED NOT USED
7 GTX-TLP3
TRANSMITTER BOARD
NOT USED NOT USED
8 GTX-TLP3
TRANSMITTER BOARD
NOT USED NOT USED
9 DRX
EMPTY
NOT USED NOT USED NOT USED NOT USED
UPPER FRONT
PLANE CARD
LOWER FRONT
PLANE CARD