GE M60 UR Series, Instruction Manual

Page: 637 / 662

GE Multilin M60 Motor Protection System F-7
APPENDIX F F.1 DEVICE PROFILE DOCUMENT
F
34
cont’d
2 32-bit Analog Input Reporting Deadband 1
(read)
00, 01
(start-stop)
06
(no range, or all)
07, 08
(limited quantity)
17, 28
(index)
129
(response)
00, 01
(start-stop)
17, 28
(index)
(see Note 2)
2
(write)
00, 01
(start-stop)
07, 08
(limited quantity)
17, 28
(index)
3 Short floating point Analog Input Reporting
Deadband 1
(read)
00, 01
(start-stop)
06
(no range, or all)
07, 08
(limited quantity)
17, 28
(index)
129
(response)
00, 01
(start-stop)
17, 28
(index)
(see Note 2)
50 1 Time and Date
(default – see Note 1) 1
(read)
2
(write)
00, 01
(start-stop)
06
(no range, or all)
07
(limited qty=1)
08
(limited quantity)
17, 28
(index)
129
(response)
00, 01
(start-stop)
17, 28
(index)
(see Note 2)
52 2 Time Delay Fine 129
(response)
07
(limited quantity)
(quantity = 1)
60 0 Class 0, 1, 2, and 3 Data 1
(read)
20
(enable unsol)
21
(disable unsol)
22
(assign class)
06
(no range, or all)
1 Class 0 Data 1
(read)
22
(assign class)
06
(no range, or all)
2 Class 1 Data 1
(read)
20
(enable unsol)
21
(disable unsol)
22
(assign class)
06
(no range, or all)
07, 08
(limited quantity) 3 Class 2 Data
4 Class 3 Data
70 0 File event - any variation 1
(read)
06
(no range, or all)
07, 08
(limited quantity)
22
(assign class)
06
(no range, or all)
2 File authentication 29
(authenticate)
5b
(free format)
129
(response)
5b
(free format)
3 File command 25
(open)
27
(delete)
5b
(free format)
4 File command status 26
(close)
30
(abort)
5b
(free format)
129
(response)
130
(unsol. resp.)
5b
(free format)
5 File transfer 1
(read)
2
(write)
5b
(free format)
129
(response)
130
(unsol. resp.)
5b
(free format)
6 File transfer status 129
(response)
130
(unsol. resp.)
5b
(free format)
7 File descriptor 28
(get file info.)
5b
(free format)
129
(response)
130
(unsol. resp.)
5b
(free format)
80 1 Internal Indications 1
(read)
00, 01
(start-stop)
(index =7)
129
(response)
00, 01
(start-stop)
2
(write)
(see Note 3)
00
(start-stop)
(index =7)
--- No Object (function code only)
see Note 3
13
(cold restart)
--- No Object (function code only) 14
(warm restart)
--- No Object (function code only) 23
(delay meas.)
Table F–2: IMPLEMENTATION TABLE (Sheet 4 of 4)
OBJECT REQUEST RESPONSE
OBJECT
NO.
VARIATION
NO.
DESCRIPTION FUNCTION
CODES (DEC)
QUALIFIER
CODES (HEX)
FUNCTION
CODES (DEC)
QUALIFIER
CODES (HEX)
Note 1: A default variation refers to the variation responded when variation 0 is requested and/or in class 0, 1, 2, or 3 scans. The default varia-
tions for object types 1, 2, 20, 21, 22, 23, 30, and 32 are selected via relay settings. See the
Communications section in Chapter 5 for
details. This optimizes the class 0 poll data size.
Note 2: For static (non-change-event) objects, qualifiers 17 or 28 are only responded when a request is sent with qualifiers 17 or 28, respec-
tively. Otherwise, static object requests sent with qualifiers 00, 01, 06, 07, or 08, will be responded with qualifiers 00 or 01 (for change-
event objects, qualifiers 17 or 28 are always responded.)
Note 3: Cold restarts are implemented the same as warm restarts – the M60 is not restarted, but the DNP process is restarted.