GE
RAFT
LOGIQ P9/P7
D
IRECTION
5604324
, R
EVISION
11
DRAFT (J
ANUARY
24, 2019)
S
ERVICE
M
ANUAL
8-58
Section 8-5 - Settings - Backup and Restore
8-5-1
General Information
The Backup/Restore function enables the user to:
•
Copy/Restore the patient archive.
•
Copy/Restore the system configuration. The Copy/Restore system configuration feature enables
the user to configure several units with identical presets, providing that the units have the same
software version.
8-5-1-1
Supported Media
Depending on the system, you can use either a CD-R, DVD-R, USB Flash Drive, or USB Hard Disk for
system backup/restore. System does NOT support CD-RW/DVD+R/DVD+RW.
For the sake of simplicity, we have used the CD-R in the examples in this section.
8-5-1-2
General Notes
NOTE:
When you restore backup data from the Utility menu, the LOGIQ P9/P7 application usually restarts
automatically when the restoring is complete.
NOTE:
To perform backup and restore procedures, you must login with administrator privileges.
8-5-2
Backup Procedures
Back up patient data AFTER you’ve archived (via EZBackup/EZMove) images so that the pointers to
the patients images reflect that the images have been moved to removable media and are no longer on
the hard drive.
1) Insert a media into the drive or USB device into a USB port.
NOTE:
About formatting media, See ‘Formatting removable media’ on Basic User Manual for more information.
2) In the patient screen, select the dataflow Local Archive - Int. HD.
3) On the touch panel, press Utility.
4) On the Utility touch panel, press System.
5) On the monitor display, select Backup/Restore.
The Backup/Restore screen is displayed.
6) In the Backup list,
-
Select Patient Archive and Report Archive to backup the patient records.
-
Select User Defined Configuration to copy system settings and user presets.
NOTE:
The detailed section of this menu decouples the user defined configuration above. This allows you to
selectively restore what you want to restore across multiple machines.
7) Specify where to save data in the media field.
8) Select Backup.
The system performs the backup. As it proceeds, status information is displayed on the Backup/
Restore screen.
9) At the end of the process, the Backup completed message is displayed on the monitor.
Press Eject (F3) for eject media/disconnect USB.
10) Make sure to physically label the media. An identification of the system should also be noted on the
media and a backup log should be kept.
File the media in a safe place.
