GE AMX 4+, Technical Manual

Page: 75 / 132

REV 5 DIRECTION 2173225-100
5-1
This section provides procedures covering the removal and installation of trim covers.
# " !
1. Remove rear cover from unit by removing two screws securing it to base assemĆ
bly. See Illustration5-1.
2. Remove five binding head screws and flat washers securing cassette drawer hinge
to base assembly.
3. Pull cassette drawer to open position. It is retained by magnetic catch. Lift
drawer up and out of base assembly.
ILLUSTRATION 5-1
HANDLE
CASSETTE
DRAWER
SCREWS
REAR COVER
SCREWS (2)
BASE ASSEMBLY
# "
1. Place cassette drawer inpositiononbase assembly.
2. Attach cassette drawer hinge to base with five binding head screws and flat washĆ
ers.
3. Install rear cover to base assembly with two screws.
4. Close cassette drawer. Magnetic catch will hold it in its place.