GE AMX 4+, Technical Manual

Page: 16 / 132

xiv
The instructions cover the removal, installation, and adjustment of the field serviceĆ
able assemblies and parts comprising the unit. Illustrations are provided as a suppleĆ
ment to the procedures to assist the service technician in understanding the relationĆ
ship of the parts involved.
The front end of the unit is defined as the end containing the vertical column and bumĆ
per assembly. Left and right sides are determined by standing at the rear (handle end)
of the unit, facing the unit.
A list of tools required to perform the service adjustment procedures is given below.
With the exception of the vertical column lifting tool and floor jack, the tools listed are
part of the standard complement of tools supplied in the service technician's tool kit.
Tools
D Vertical column lifting tool (46-303362P1)
D AMX-4 Series Lifting Jack (46-302966P1)
D Counterweight Lifting Tool (46-303491G1)
D HHS Field Test Kit (46-177372G1)
D Torque Wrench 2-36 pound-inches/0.23 4.1 Newton-meters (46-282782P1)
D Torque Wrench Kit (46-268445G1)
D H/V Cable Spanner Wrench (507A935G1)
Materials
D Loctite sealant type 242 (46-170686P2 10 cc bottle) and 290 (46-170687P2 50cc
bottle)
D Bearing grease - Lithium (Fiske 630-A-A) or equal
D Silicone insulating compound (46-125224P3 3 oz. tube)
D Diala AX Dielectric Insulating Oil (T0552G 1 gallon)
D Electrical tape
D Cotton rags
D Cotton swabs
Periodic inspection instructions for various assemblies of the AMX-4+ are listed in
the maintenance schedule given in Direction 2173227-100, AMX-4+ Periodic MainĆ
tenance . All deficiencies uncovered during inspection should be corrected before furĆ
ther use of the equipment.
A list of AMX-4+ assemblies for which removal and installation procedures are proĆ
vided in the following index. The index lists the section in which the procedure is preĆ
sented, the name of the assembly, and the number of the paragraph that contains the
removal or installation procedure.