Furuno FSV-30 Operator'S Manual Download

Page: 66 / 190

2. HORIZONTAL MODE

2-36

key pressed once

twice

three times

four times

[FISH]

This data is the latest fish
mark data.

Fish mark

2.17.2 Deleting

fish

marks

Fish marks can be deleted individually with the [DELETE MARK] key or by

earliest entry through the menu. Note that the [DELETE MARK] key also erases

event marks.

Deleting fish marks with the [DELETE MARK] key

Use the trackball to place the trackball mark on the fish mark you want to erase.

The color of the fish mark changes from white to red when the fish mark is

correctly selected. Press the [DELETE MARK] key to delete the fish mark.

Deleting fish marks through the menu

1. Press the [MENU] key to show the menu.

2. Select OTHERS and press the [MENU] key.

3. Select ERASE MARKS and press the [MENU] key.

ERASE MARKS

QUIT

OTHERS

EVENT MARK

: DELETE

FISH MARK

: DELETE

OWN SHIP POS MARK : DELETE

SHIP'S TRACK

: DELETE

QUIT

ERASE MARKS menu

4. Select FISH MARK and press the [MENU] key. Each press of the [MENU]

key deletes the earliest fish mark.

5. Select QUIT at the top of the menu screen and press the [MENU] key to

close all menus.

Summary of Contents for FSV-30































































































































































































Search results

Summary of Contents for FSV-30

Reviews:

Related manuals for FSV-30

Brands by name

Popular brands

Furuno FSV-30, Operator'S Manual

Search results

Summary of Contents for FSV-30

Reviews:

Related manuals for FSV-30

Brands by name

Popular brands