manualshive.com logo in svg

Furuno FSV-30, Operator'S Manual

The Furuno FSV-30, a state-of-the-art navigational device, comes with a comprehensive Installation Manual to ensure hassle-free setup. This detailed manual is available for free download from manualshive.com, offering users an easy access to step-by-step instructions on configuring and optimizing their Furuno FSV-30 experience.

Share
Download
background image

 

 

4-1 

4. 

ECHO SOUNDER MODE 

The echo sounder picture is available with connection of an echo sounder. 

 

4.1 

Basic Operating Procedure 

1. 

Turn on power.

2.

 Lower transducer.

4.

 Select appropriate echosounder mode.

3. 

Adjust display brilliance.

5. 

Adjust range, gain and

picture advance speed on
the ES1 SETTING (or
ES2 SETTING) menu.

FSV-30

H/V

H1/H2

 

Control unit 

Summary of Contents for FSV-30































































































































































































Reviews:

No comments

Related manuals for FSV-30

Furuno COLOR SCANNING CSH-23F/24F Operator'S Manual preview
COLOR SCANNING CSH-23F/24F
Brand: Furuno Pages: 116

Brands by name

Popular brands

Load more brands