Furuno FSV-30, Operator'S Manual

Page: 162 / 190

10. MAINTENANCE, TROUBLESHOOTING
10-6
WARNING!!
TRANSDUCER IS KEPT EXTENDED. MAX
ALLOWABLE SPEED FOR EXTENDED
TRANSDUCER IS 18 KT. PRESS [R/B] KEY TO
TURN OFF ALARM.
This message blinks at the screen center and
the buzzer sounds when the transducer is
extended and ship’s speed, input by external
equipment, exceeds 18 kt for 1200 mm stroke
or 15 kt for 1600 mm stroke. Silence the buzzer
with the [R/B AUDIO] key and lower ship’s
speed.
WARNING!!
MAX ALLOWABLE SPEED DURING
RAISING/LOWERING TRANSDUCER IS 15 KT.
PRESS [R/B] KEY TO TURN OFF ALARM.
This message blinks at the screen center and
the buzzer sounds when the transducer is
raised/lowered and ship’s speed, input by
external equipment, exceeds 15 kt for 1200 mm
stroke or 12 kt for 1600 mm stroke. Silence the
buzzer with the [R/B AUDIO] key and lower
ship’s speed.
10.8 Error Codes
The equipment displays a (blinking) three-digit error code at the bottom of the
display when it detects internal trouble. In case of multiple error, error codes
appear in numerical order and the maximum number of codes displayable is five.
The codes remain on the screen until the corresponding trouble is fixed, and a
buzzer sounds each time a new error code is added to the on-screen error code
display. For any error code, report error code number to your dealer.
* * * Error Code * * * #003, #006, #108
Error code
10.9 Status Messages
Status messages appear at the screen center to alert the operator. These are as
below.
Status messages
Status
message
Meaning
TX OFF Transmission turned off from the menu.
RAISE/LOWER
TEST*
Raise/lower command received from the control unit in normal
operation, to manually test raise/lower switch in hull unit.
Raise/lower keys on the control unit are inoperative during the hull
unit test.
* = Not displayed when TX is OFF.