manualshive.com logo in svg

Furuno FSV-35, Installation Manual

The Furuno FSV-35 is a top-of-the-line fish finder with exceptional features. To get started quickly, our website offers a free downloadable quick manual, allowing you to enjoy this amazing device without any hassle. Visit manualshive.com now to easily access and download your user manual.

Share
Download
background image

www.furuno.com

All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

Installation Manual

Color Scanning Sonar

Model

 FSV-35/FSVB-35S

SAFETY INSTRUCTIONS ................................................................................................ i
SYSTEM CONFIGURATION .......................................................................................... iii
EQUIPMENT LISTS........................................................................................................ iv

1. HOW TO INSTALL THE SYSTEM ..........................................................................1-1

1.1 Hull Unit .............................................................................................................................1-1
1.2 Processor Unit ...................................................................................................................1-7
1.3 Control Unit ........................................................................................................................1-9
1.4 Transceiver Unit...............................................................................................................1-11
1.5 Transducer Cable Extension Kit  .....................................................................................1-12
1.6 IF Unit ..............................................................................................................................1-13
1.7 Grounding the Equipment ................................................................................................1-13
1.8 Attachment Flange (option)..............................................................................................1-13
1.9 Attachment Kit (option) ....................................................................................................1-14

2. WIRING....................................................................................................................2-1

2.1 How to Use the Crimping Tool, Pin Extractor ....................................................................2-1
2.2 How to Connect Units ........................................................................................................2-2
2.3 Processor Unit ...................................................................................................................2-3
2.4 IF Unit ................................................................................................................................2-6
2.5 Control Unit and Remote Controller...................................................................................2-9
2.6 Transceiver Unit...............................................................................................................2-11
2.7 Transducer Cable Extension Kit  .....................................................................................2-14
2.8 Control Box of Hull Unit....................................................................................................2-15
2.9 Input Voltage and Fuses ..................................................................................................2-16

3. ADJUSTMENTS AND CHECKS .............................................................................3-1

3.1 Hull Unit Check ..................................................................................................................3-1
3.2 How to Show the System Menu.........................................................................................3-3
3.3 How to Adjust the Heading ................................................................................................3-4
3.4 How to Configure the Own Ship Mark................................................................................3-6
3.5 Others Menu ......................................................................................................................3-7

APPENDIX 1 JIS CABLE GUIDE .............................................................................AP-1

Summary of Contents for FSV-35





































































Reviews:

No comments

Related manuals for FSV-35

Wassp WMB-160F Installation Manual preview
WMB-160F
Brand: Wassp Pages: 68

Brands by name

Popular brands

Load more brands