Furuno FSV-30 Operator'S Manual Download

Page: 129 / 190

7. CUSTOMIZING THE EQUIPMENT

7-3

After the dialog box disappears the following message appears.

USER MENU REGISTRATION

SELECTED ITEM WILL BE
REGISTERED IN MAIN MENU.

YES

Message for registration of user menu item

Note:

If 10 items are already registered to the user menu the following

message appears. Delete unnecessary items from the user menu and

then repeat this procedure to register different item.

CAUTION

10 ITEMS ALREADY REGISTERED.
DELETE UNNECESSARY ITEMS
AND TRY AGAIN.

Caution for registration of user menu item

5. Select YES and press the [MENU] key to register item selected to the menu.

6. Select QUIT at the top of the menu screen and press the [MENU] key to

close all menus.

7.2

Function Keys (F1-F6)

The function keys provide one-touch display of desired menu item or entire

menu. The default function key settings are as below. Not all menu items and

menus may be programmed to the function keys. See the menu tree on page

M-1 to M-4 for items which may be programmed.

The default settlings are as below:

F1: PICTURE SHOT (PRESET, MEMORY CARD menu)

Store current picture

F2: RECALL PICTURE (PRESET, MEMORY CARD menu)

Recall picture in memory

F3: PRESENTATION MODE (DISPLAY SETTING menu)

Select presentation mode

F4: DIMMER (DISPLAY SETTING menu)

Adjust panel dimmer

F5: EVENT MARK (ERASE MARKS menu)

Erase event mark

F6: SHIP’S TRACK (ERASE MARKS menu)

Erase ship’s track

Summary of Contents for FSV-30































































































































































































Search results

Summary of Contents for FSV-30

Reviews:

Related manuals for FSV-30

Brands by name

Popular brands

Furuno FSV-30, Operator'S Manual

Search results

Summary of Contents for FSV-30

Reviews:

Related manuals for FSV-30

Brands by name

Popular brands