FUSION SPLICER 90S Rev5
76
Delete of splice result data
1.
Please refer to the above to display the splice memory.
2.
Select the desired target result and click the icon
3.
Click the icon
4.
To confirm and delete the data for the selected record, then press “Yes”.
Splice Result Error
Error messages can only be displayed for splice results that generated an
error.
1.
Select the Memory icon in the [Main Menu] screen.
Select the Splice Result of Error icon to display the [Splice Result of Error]
Menu. This enables access to all the splice data stored in memory.
2.
Move the cursor using the “UP” or “DOWN” arrow icon to scroll to the
desired memory area, and then touch the screen for a specific memory
number. This displays the detailed data for the selected splice record.
3.
The error message is displayed on the first page of the splice data. It will be
flashing on and off.
4.
Please refer to the section above for how to delete data.
Clear All Splice Results
All splicing results can be deleted at once.
1.
Select the Clear All Splice Results icon in the [Memory] Menu.
2.
Press the “Execute” icon to confirm and delete all splice results data.
Camera Image
This function is used to store the fiber image after splice or error occurred. A total
of 100images can be stored.
1.
Select the Camera Image icon in the [Memory] screen.
2.
Select the desired target memory to display or delete.
How to store the Camera Image Data
Select a specific memory number location where there is no image already
stored. Press the “O.K.” icon to store the camera image data to that location.
How to display the Camera Image Data
Select the desired memory number. The fiber image data is displayed.
How to delete the Camera Image Data
Press the icon for the image data to be deleted. The confirmation screen
is displayed. Select the “Yes” icon to confirm deletion. The camera image
data is deleted.
Max number of image storage is 100, and the image cannot be over-
written, so delete some images to store new images.
