FUSION SPLICER 90S Rev5
6
CAUTIONS!
Do not store fusion splicer in any area where temperature and humidity
are extremely high. Possible equipment failure may result.
Do not touch protection sleeve or tube-heater during heating or
immediately after completion of heating. Their surfaces are very hot
and touching these may result in skin burn.
Do not place the fusion splicer in an unstable or unbalanced position.
The fusion splicer may shift or lose balance, causing the unit to fall.
Possible personal injury or equipment damage may result.
The fusion splicer is precision adjusted and aligned. Do not allow the
unit to receive a strong shock or impact. Possible equipment failure
may result. Use supplied carrying case for transportation and storage.
The carrying case protects the fusion splicer from damage, moisture,
vibration and shock during storage and transportation.
CAUTIONS!
Follow the below listed instructions for handling electrodes.
• Use only specified electrodes.
• Set the new electrodes in the correct position.
• Replace the electrodes as a pair.
Failure to follow the above instructions may cause abnormal arc
discharge. It can result in equipment damage or degradation in
splicing performance.
Do not use any chemical other than pure alcohol (99% or greater) to
clean the objective lens, V-groove, LCD monitor, etc., of the fusion
splicer. Otherwise, blurring, discoloration, damage or deterioration may
result.
The fusion splicer requires no lubrication. Oil or grease may degrade
the splicing performance and damage the fusion splicer.
The equipment must be repaired or adjusted by a qualified technician or
engineer. Incorrect repair may cause fire or electric shock. Should any
problems arise, please contact the nearest Fujikiura authorized
distributors.
RECYCLING and DISPOSAL
In European Union
In accordance with the European Parliament Directive 2002/96/EC,
electrical parts and materials that can be re-used and/or recycled have
been identified in order that the use of new resources and the amount of
waste going for landfill can be minimised.
In the European Union, do not discard this product as unsorted
municipal waste. Contact your local authorities.
In other countries
[Recycling]
To recycle this product, disassemble it first, sort each part separately by
material components and follow your local recycling regulations.
[Disposal]
This product can be disposed of same as the standard electric poroducts.
Follow your local disposal regulations.
