FUSION SPLICER 90S Rev5
20
Operation of sheet key
Key name
Key function
OPEN/CLOSE
key
To open and close the wind-protector.
ON/OFF key
ON/OFF LED
To turn ON/OFF the power.
LED turns green when pressing ON/OFF key, turns red
when pressing the ON/OFF key again.
HEAT key
HEAT LED
Starts the tube heater heating process.
If the HEAT key is pressed once during heating, LED will
start blinking. Heating operation is stopped if the HEAT key
is pressed again when the LED is blinking.
RESET key
Regardless the splicer’s status, [RESET] stops any function
except the tube heater heating process. After pressing, the
splicer will return to the ready state with a beep sound.
SET key
Starts the splicing operation, or progresses through a
PAUSE state.
UP/DOWN
arrow keys
These arrows are used to move the cursor for navigating the
menu, or to select alphanumeric text. They also allow
operation of the motors "Backward" and "Forward" during
manual motor control.
OPEN/CLOSE key
SET key
DOWN key
ON/OFF key
HEAT key
RESET key
UP key
HEAT LED
ON/OFF LED
