FUSION SPLICER 90S Rev5
53
Procedure for Cleaver
Procedure1
・
Remove the battery from the cleaver to stop all communication.
Remove the battery when transporting by aircraft.
*It is not possible to count cleaves or rotate the blade without batteries installed.
Procedure2
1.
Press and Hold the Link button on the CT50 for 6 seconds.
2.
The blue LED light blinks quickly and then turns off. Now wireless data
communication has ceased.
On the pairing screen of the splicer, "Paired" is displayed, but wireless
data communication can’t be used unless it is reestablished. If you want
to reestablish the wireless data communication, refer to the procedure
on establishing wireless data communication.
Procedure for Ribbon Fiber Stripper
Procedure1
1.
Press and Hold the Link button on the RS02/RS03 for 6 seconds.
2.
The blue LED light turns off. Now wireless data communication has ceased.
On the pairing screen of the splicer, "Paired" is displayed, but wireless
communication can’t be used unless it is reestablished. If you want to
reestablish wireless communication, refer to the previous procedure on
establishing wireless data communication.
Procedure2 (In the case of RS03)
・
Remove the battery from the stripper to stop all communication.
Remove the battery when transporting by aircraft.
*Once the wireless connection between the ribbon fiber stripper and the splicer
or a smartphone is successful, the RS03 continuously tries to maintain a
connection, even when the power is off. It is necessary to turn the wireless
communication function OFF by these methods to disable the connection with
the ribbon fiber stripper.
