FUSION SPLICER 90S Rev5
49
5. Attach the metal plate to the sheath clamp. Then tighten two screws
with 20 cNm.
How to itstall:
1. Remove two screws located underneath of the sheath clamp.
2. Remove metal parts as below.
3. Install the protrusion to the sheath clamp by using the tweezer.
4. Tilt the white plastic part to make a space for the spring as below photo while
keeping to not fall. After placed the spring, adjust the position with tweezers
as below so each spring edge fit the convex of clamp and concave of white
part.
5. Put the big plastic part in the pot of the clamp while keeping pressing down
the small plastic part with tweezers.
6.
Place the metal plate and fix by two self-tapping screws with torque 20 cNm.
Do not overtighten the screws.
Space
Space
Do not overtighten the screws.