FUSION SPLICER 90S Rev5
63
Initializing edited parameters
Edited parameters can easily be initialized to their preset parameters by
performing the following procedure:
1. Press icon.
2. Enter the [Fundamental Settings] screen.
3. Select Fiber Type icon and select the same Fiber Type.
4. All parameters are overwritten by the factory value in the database.
Creating or deleting splice modes
How to create a splice mode
There are a standard set of splice modes listed when the splicer is first
shipped, and all the other modes are displayed [BLANK]. Follow the steps
below to add a splice mode:
1. Select a “BLANK” splice mode that is gray in [Splice Mode] screen.
2. Change “Fiber Type” to the splice mode in the database.
3. The parameters of the selected “Fiber Type” are now installed in the splice
mode.
BLANK
