![background image](http://html1.mh-extra.com/html/freecom/quantum-superloader-3/quantum-superloader-3_manual_2329731045.webp)
Chapter 3 Operating the Autoloader
Using Cartridges
SuperLoader 3 Autoloader User’s Guide
27
Insert a Single
Cartridge
3
When you want to load a single cartridge into the autoloader, you can use
the mailslot. However, if the
Security
option is turned on, you have to
enter a valid password to unlock the mailslot before you can load a
cartridge. When you insert a cartridge through the mailslot, you can load
it into the tape drive or store it in a magazine.
To insert a cartridge in the tape drive:
1
From the main menu, scroll to
Commands
, and then press
Enter
.
2
From the
Commands
submenu, scroll to
Enter
, and then press
Enter
.
3
From the
Enter
submenu, scroll to
To Drive
, and then press
Enter
.
4
Once you have inserted the cartridge, the prompt
Enter to Continue
appears. You have 20 seconds to press
Enter
in response.
To insert a cartridge in a magazine slot:
1
From the main menu, scroll to
Commands
, and then press
Enter
.
2
From the
Commands
submenu, scroll to
Enter
, and then press
Enter
.
3
From the
Enter
submenu, scroll to
To Location
, and then press
Enter
.
Scroll through the magazine slots and view their status until you find
the appropriate slot. Slots that are occupied by a data cartridge are
indicated by an asterisk (
*
).
4
Scroll to the slot where you want to store the cartridge, and then
press
Enter
.
Note:
After
Load cartridge
appears on the LCD, you have 20
seconds to load a cartridge through the mailslot before it
relocks.
Note:
For the Quantum SuperLoader 3 autoloader, push in the
cartridge until you meet resistance. The cartridge will be
about 2 inches (5.0 cm) inside the mailslot, and only the
end of the cartridge will be visible through the mailslot.
Note:
If the insert cartridge function fails, the cartridge ejects and
you will have to perform steps
3
and
4
again.
Summary of Contents for Quantum SuperLoader 3
