Chapter 3 Operating the Autoloader
Viewing Status Information
36
SuperLoader 3 Autoloader User’s Guide
Viewing Element
Status
3
The element status reports the status of the magazine slots. The status
indicates whether a slot contains a cartridge or not, and which slot is
allocated as the cleaning cartridge's slot. To view an element's status:
1
From the main menu, scroll to
Status
, and then press
Enter
.
2
From the
Status
submenu, scroll to
Autoloader
, and then press
Enter
.
3
From the
Autoloader
submenu, scroll to
Element Status
, and then
press
Enter
.
4
Press
Enter
.
You can scroll through each of the slots. Slots that are occupied by a
data cartridge are indicated by an asterisk (
*
). The empty slot that is
assigned to a cleaning cartridge is indicated with an exclamation
point (
!
). The slot that is occupied by a cleaning cartridge is indicated
with an ampersand (
@
).
5
Scroll to the slot containing the cartridge for which you want to see
the label, or the cartridge you want to move, and then press
Enter
.
The
Element Status
screen appears, displaying the bar code label for
that cartridge. A move command also appears on the screen.
If you want to move the cartridge, scroll until the location you want
to move to appears under
To:
, and then press
Enter
. If you do not
want to move the cartridge, press
Escape
.
HW Rev
The number indicates the hardware version.
ME Rev
The number indicates the mechanical version.
Note:
The
Move
command appears only if the security is
disabled or if you are logged in as Administrator or
Operator.
Field
Description
Summary of Contents for Quantum SuperLoader 3
