Chapter 9 Basic Logs
Error Codes
SuperLoader 3 Autoloader User’s Guide
143
Soft Logs
9
Soft Logs
record the autoloader's history during different conditions.
They are similar to Hard Logs
but may have been overwritten by a
recovery action.
Update Logs
9
Update Logs record firmware changes and upgrades in the autoloader.
An Update Log
also records when hardware is updated or changed.
Shadow Logs
9
You will not use these logs.
D2–D4
Position Sensor Bad
D5–DE
Cartridge flags located on the magazine may be bad or the
sensor to detect the flags may have a problem
DF
Jammed Cartridge
Software Location ID:
Defines a location in the firmware internal to the task being performed.
This ID is used by firmware engineering to identify what part of the actual firmware task
detected the event.
Note:
There are no fields in the Shadow Event log that will help
identify problems for the end user. This log is for use by the
engineering department.
Field
Description
Summary of Contents for Quantum SuperLoader 3
