Freecom Quantum SuperLoader 3, Manual

Page: 82 / 230

Chapter 5 Administration
Configuring the Autoloader
64 SuperLoader 3 Autoloader User’s Guide
When you have advanced through all of the digits of the IP address,
the autoloader displays
Enter to save
.
6 Press
Enter
. The
Configuration
submenu appears and the static IP is
now in effect. You do not need to reboot the autoloader.
7
Press
Escape
or
Enter
to return to the Ethernet submenu.
Setting the Subnet
Mask
5
Creating a subnet mask is a method of splitting IP networks into a series
of subgroups, or subnets, to improve performance or security.
To set a subnet mask:
1 From the main menu, scroll to
Configuration
, and then press
Enter
.
2 From the
Configuration
menu, scroll to
Ethernet
, and then press
Enter
.
3 From the
Ethernet
submenu, scroll to
Set Subnet Mask
, and then press
Enter
.
4 At each position of the Subnet Mask address, use the up and down
arrows to change the value of each digit. Press
Enter
to advance the
cursor to the next digit.
When you have advanced through all of the digits of the subnet mask
address, the autoloader displays
Enter to save.
5 Press Enter .
New Subnet Mask xxx.xxx.xxx
appears on the LCD. You do
not need to reboot the autoloader.
6 Press
Escape
or
Enter
to return to the Ethernet submenu.
Setting an IP
Gateway
5
To set an IP gateway:
1 From the main menu, scroll to
Configuration
, and then press
Enter
.
2 From the
Configuration
menu, scroll to
Ethernet
, and then press
Enter
.
Note:
If you make a mistake, press
Escape
to backspace to the
digit you want to change.
Note: If you make a mistake, press
Escape
to backspace to the
digit you want to change.