Freecom Quantum SuperLoader 3, Manual, Page: 71 / 230

Chapter 4 On-board Remote Management
Updates Page
SuperLoader 3 Autoloader User’s Guide 53
Updates Page
4
You can browse to find system updates and then upload the updates. To
get system updates:
1 From any page, click the
Updates
heading. The
Firmware Update
screen displays.
2 Click
Browse
to navigate to the host system for the update file. The
file should end in an
.img
extension.
3 Click
Upload
.
4
Click
OK
in response to the confirmation box. The autoloader
automatically uploads the new code and processes it to the system.
Note: By entering an improper range of IP addresses, a user could
possibly lock out all IP clients from administering the
autoloader. If this occurs, you can restore the default values by
running
Restore Default
from the front panel
Configuration
Menu
.
Note: A Microsoft issue can keep a user from updating drive or
loader firmware over the On-board Remote Management
interface. This can occur under Windows Server 2003 with
Service Pack 1 (SP1), or if a user has installed Microsoft
Security Update MS05-019. This problem will appear with a 6F
Communication Error message on the front panel with the
warning light on. On-board Remote Management will
continue to report the autoloader status as
Initialization
.
Microsoft has described a workaround for this problem in
their product with Technical Support Article 898060 (
http://
support.microsoft.com/default.aspx?scid=898060
). If this problem
occurs, the autoloader should be restarted to avoid further
communication errors.