Chapter 2 Installation and Configuration
Choosing a Location
SuperLoader 3 Autoloader User’s Guide
9
• Documentation CD containing all of the documentation in Adobe
®
Portable Document Format (PDF)
• Bar code labels
Choosing a Location
2
Choose a location that meets the following criteria (see
table 1
). The
autoloader uses standard rack mounting hardware.
Table 1 Location
Criteria
Criteria
Description
Rack requirements
Standard 19-inch rack with 2U of clearance.
Room temperature
10–35° C (50–95° F)
Power source
AC power voltage: 100–127 VAC; 200–240 VAC
Line frequency: 50–60 Hz
Note:
Locate the AC outlet near the autoloader. The AC
power cable is the product’s main disconnect
device and must be easily accessible at all times.
Weight
14.1 kg (31 lb.) unloaded
17.2 kg (38 lb.) loaded with 2 magazines, 16 cartridges
Air Quality
Minimize sources of particulate contamination. Avoid
areas near frequently used doors and walkways, cooling or
exhaust vents, stacks of supplies that collect dust, printers,
and smoke-filled rooms.
Caution:
Excessive dust and debris can damage tapes
and tape drives.
Summary of Contents for Quantum SuperLoader 3
