![background image](http://html1.mh-extra.com/html/freecom/quantum-superloader-3/quantum-superloader-3_manual_2329731135.webp)
Chapter 8 Troubleshooting
Checking for Errors
SuperLoader 3 Autoloader User’s Guide
117
The autoloader generates four types of logs. For troubleshooting errors,
you will only use one type, Hard Error logs. The screen displays the error
message and the Hard Error logs record all hard error events.
The following table lists the error messages that are displayed on the LCD
and the error code.
Table 9 Error Codes
Note:
To troubleshoot hard errors, you may need to power cycle,
repair, or replace the unit.
Screen Display
Error Code
TX ALD success
00
TX Deleted
01
TX Pool error
02
TX PTR error
03
TX Wait error
04
TX Size error
05
TX Group error
06
TX EVT Timeout
07
TX Option error
08
TX QUE error
09
TX QUE Timeout
0A
TX QUE Full
0B
TX SEM error
0C
TX SEM Timeout
0D
TX Thread error
0E
TX Priority err
0F
Summary of Contents for Quantum SuperLoader 3
