Freecom Quantum SuperLoader 3, Manual, Page: 144 / 230

Chapter 8 Troubleshooting
Checking for Errors
126 SuperLoader 3 Autoloader User’s Guide
Figure 34 Error Code
Bit Descriptions
Figure 35 Error Code
Field Descriptions
Bit Description
0–3 Error Location
4–7 Error Location
8–11 Error Location
12–15 Error Location
16–19 Error Type
20–23 Error Type
24–27 Task ID
28–29 Task ID
30–31 Recovery Action
Field Description
Recovery Action
Defines what the autoloader will do based on the
event that occurred.
• If the value is 0, the autoloader will continue
operations because this is typically a soft,
recoverable event, or an event that is just
recording an action.
• If the value is other than 0, then you must reboot
the autoloader in order to recover from the
event. The reboot will happen automatically.
Task ID:
Defines what firmware task was being performed at the time of the event. This ID is
presented in Hex format.
00 System Timer