Freecom Quantum SuperLoader 3, Manual, Page: 53 / 230

Chapter 3 Operating the Autoloader
Viewing Status Information
SuperLoader 3 Autoloader User’s Guide 35
Table 2 Autoloader
Status
Viewing Firmware
Version
3
To view the current firmware version, use the following procedure:
1 From the main menu, scroll to
Status
, and then press
Enter
.
2 From the
Status
submenu, scroll to
Autoloader
, and then press
Enter
.
3 From the
Autoloader
submenu, scroll to
Version
, and then press
Enter
.
A list of messages appears on the LCD. The firmware version is listed
as
Firmware: VX.XX
where
X.XX
is the current installed version of the
firmware.
Table 3 Firmware
Version Fields
Status Message Description
Magazines L=* The left magazine is present.
R=* The right magazine is present.
SCSI ID A digit 0 through 7
(default 5)
The assigned SCSI ID for the autoloader.
Mode Random The change mode is set to Random.
SEQUENTIAL The change mode is set to Sequential.
BC Reader Yes or No A bar code reader is present.
Field Description
Firmware The number indicates the firmware version.
EDC The number indicates the Error Correction Code that
was generated when the firmware was installed. The
autoloader uses this number to verify that the
firmware and the memory holding the firmware are
good.