Freecom Quantum SuperLoader 3, Manual, Page: 32 / 230

Chapter 2 Installation and Configuration
Unpacking the Autoloader
14 SuperLoader 3 Autoloader User’s Guide
Unpacking the Autoloader
2
Before you begin, clear a desk or table so that you can unpack the
autoloader. You also need to select an open 2U computer rack location
near the server that will host the autoloader.
Unpack and inspect the autoloader for shipping damage by doing the
following:
1
Clear a table or desk so that you have room to unpack the autoloader.
2 Inspect the shipping box for damage. If you notice any damage,
report it to the shipping company immediately.
3 Open the shipping box and remove the accessories package. Set the
accessories package aside for now.
4 Lift the autoloader and padding out of the box and place it on the
work surface, top facing up. Do not set the autoloader on either end or
sides.
5 Carefully remove the shipping padding from the left and right sides
of the autoloader. Then remove the bag from the autoloader. Save the
packing materials in case you need to move or ship the autoloader in the
future.
Caution:
If the room in which you are working differs from the
temperature in which the autoloader was shipped or
stored by 15° C (30° F) or more, let the autoloader
acclimate to the surrounding environment for at least 12
hours before opening the shipping carton.