Freecom Quantum SuperLoader 3, Manual

Page: 96 / 230

Chapter 6 Diagnostics
On-board Remote Management Diagnostic Tests
78 SuperLoader 3 Autoloader User’s Guide
3 If you are not logged in, you will be asked to enter the Administrator
password. Do the following:
a
From the front panel, enter the administrator password by using
the
Up
and
Down
scroll arrows to select each digit, and then press
Enter
to move to the next digit. To move to the previous digit,
press
Escape
. When you have entered the entire six digit
password, you will be asked to press
Enter
one more time to
submit the password. If the password is incorrect, you will be
asked to re-enter it using the same procedure. Otherwise, you
will be returned to the
Diagnostics
menu. Press
Enter
to run the
desired test.
Running Test
appears while the test is in progress. To stop the test
prematurely, see Stopping a Diagnostic Test .
b
The
Loader—Health Check
test displays an ongoing progress
indicator while executing. When the test completes, either the
message
Test Successful
appears or the message
Test Failed
and an
error code appear.
4
If the test is successful, press
Enter
to return to the
Diagnostics
test
menu. For detailed results of a test, use On-board Remote
Management to retrieve the diagnostic test status (see Diagnostics
Using On-board Remote Management ).
On-board Remote Management Diagnostic Tests
6
You can perform the following diagnostic tests from On-board Remote
Management:
• Halt Test
• Loader—Self Test
• Loader—Health Check
• Loader—Picker Test