Chapter 2 Installation and Configuration
Installing the Device Drivers
SuperLoader 3 Autoloader User’s Guide
19
Only the devices physically at the beginning and end of the SCSI bus
should be terminated. If the host is located at the beginning of the
SCSI bus, the host should already have a terminator installed.
• Verify the connection between the autoloader and host by going to
Settings>Control Panel>System>Hardware>Device Manager>Tape
Drive
and/or
Media Changer
in Microsoft
®
Windows
®
2000, Microsoft
Windows XP and Windows Server
®
2003. For more information on
verifying the connection of SCSI devices, consult the operating
system documentation.
Installing the Device Drivers
2
There are two device drivers associated with the SuperLoader 3
autoloader. One for the autoloader itself, and a second for the tape drive
within the autoloader.
Tape Drive Device
Driver
2
Microsoft Windows 2000:
1
Make sure that you are logged on to the host server with
administrator privileges.
2
Download the latest drivers from
http://www.quantum.com/am/
service_support/downloads/default.htm
. Save the drivers to your host
computer.
Note:
Device drivers are required if you intend to use the Microsoft
Windows 2000 native backup application. Commercial backup
applications provide all necessary device driver support. Refer
to
www.quantum.com
for a list of compatible backup
applications. Please note that Microsoft Windows NT
®
does
not include native support for autoloaders. A backup
application must be used if using the SuperLoader 3
autoloader under Microsoft Windows NT.
Summary of Contents for Quantum SuperLoader 3
