For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T1251
25" X 72" BEECH
CABINETMAKER'S WORKBENCH
INSTRUCTIONS
COPYRIGHT © NOVEMBER, 2017 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MFD. SINCE 11/17) #ES19302 PRINTED IN TAIWAN
Introduction
This cabinetmaker's workbench is rock-solid and
built to last a lifetime! The Model T1251 features a
1
3
⁄
4
" solid beechwood workbench top with 36 pre-
drilled
5
⁄
8
" dog holes, all-steel frame construction,
and re-inforced corners. Four 3
1
⁄
2
" solid beech-
wood aprons border the workbench top, providing
a clamping surface for two included 15" vises.
Also included are 8 hex-head bench dogs and 8
steel bars for shelving and stock storage.
V1.12.17
Inventory
Specifications
•
Workbench Top (Width x Length) ...25" x 72"
•
Footprint (Width x Length) ..............20" x 64"
•
Height ......................................................37"
•
Workbench Vises ....................................... 2
•
Vise Mounting Locations ............................ 4
•
Dog Holes in Workbench Top .................. 36
•
Dog Holes in Vise ........................ 2 Per Side
•
Dog Hole Diameter ...................................
5
⁄
8
"
•
Maximum Weight Capacity ......... 2500+ lbs.
•
Approximate Assembly Time ............. 1 Hour
Needed for Assembly
•
Additional Person ....................................... 1
•
Drill ............................................................. 1
•
Drill Bit #2 (or Smaller) ............................... 1
•
Phillips Screwdriver #2 ............................... 1
•
Adjustable Wrench ..................................... 1
•
Pencil .......................................................... 1
•
Level or Straightedge 3' ............................. 1
Figure 1. Model T1251 25" x 72" Beech
Cabinetmaker's Workbench.
Figure 2. Inventory : vises and accessories.
Description Qty
A. Vise Heads ................................................. 2
B. Vise Plates.................................................. 2
C. Vise Handles w/Acorn Nuts
1
⁄
2
"-12 ............. 2
D. Vise Screw Rods w/Ends. .......................... 2
E. Vise Bars w/Hex Nuts
1
⁄
2
"-12 ...................... 4
F. Threaded Sleeves w/Hex Nuts
7
⁄
8
"-16 ......... 2
G. Sleeves w/Hex Nuts
7
⁄
8
"-16. ........................ 4
H. Hex-Head Bench Dogs. .............................. 8
I. Steel Bars
5
⁄
8
" x 11
3
⁄
4
" ................................. 8
B
C
D
E
F
G
A
H
I
