Freecom Quantum SuperLoader 3, Manual, Page: 66 / 230

Chapter 4 On-board Remote Management
Configuration Page
48 SuperLoader 3 Autoloader User’s Guide
• To change the
Magazines
configuration, scroll to the setting you
want for the autoloader, selecting the appropriate check box, and
then click
submit
. These settings include
Both
,
Right
, and
Left
.
The message
This will require a power cycle and ISV configuration
change. Enter To Continue
is displayed.
• To continue with the change, press
submit
. The message
Please
power cycle the tape autoloader and reconfigure the ISV app.
displays.
Setting the System Time 4
The system time is displayed by On-board Remote Management and it is
used internally for logging events and errors (see Setting the Time on
page 66).
The autoloader must be reset after each power up. The time can be reset
automatically if a time server is configured (see Setting Ethernet on
page 62). Otherwise, the time must be set manually from the front panel
or through On-board Remote Management. The time zone setting is not
lost when powered off.
To set the system time:
1 Using the first drop-down list next to
Time Zone
, select the number of
hours difference between your local time and Greenwich Mean Time
(GMT).
2 Below the
Time Zone
field, select the current
Month
drop-down list.
3 In the
Day
field, type the current day of the month.
4 In the
Year
field, type the current year.
5 In the
Hour
text box, type the current hour in 24-hour format.
Note: Whether the autoloader is connected to a time server or not, if
you want to include time changes for daylight savings time,
you must change the time zone manually.
Note: For example, if you live in Colorado, the time difference is
–6 hours in the summer and –7 hours in the winter.