Freecom Quantum SuperLoader 3, Manual, Page: 68 / 230

Chapter 4 On-board Remote Management
Configuration Page
50 SuperLoader 3 Autoloader User’s Guide
2 Click
submit
.
Setting Security Options 4
When you enable the security option, users must enter a password to
access the autoloader's front panel functionality. A password allows
either administrator-level access or operator-level access (see Setting
Security on page 70). To set security:
1 From any page, click the
Configuration
heading. The
Configuration
screen displays.
2 On the left-hand side of the screen, click
Security
. The
System
Security
section of the screen displays.
3
To enable front panel security, select the check box next to
Front Panel
Security Enabled
.
4
If the check box is blank, the security option for the front LCD panel
is not enabled.
5 Click
submit
.
To reset the front panel password:
1 From any page, click the
Configuration
heading. The
Configuration
screen displays.
2 On the left-hand side of the screen, click
Security
.
3 Select the check box next to
Reset Front Panel Password
. A check
mark appears.
4
Click
submit
.
To set
User Administration
:
1
From any page, click the
Configuration
heading. The
Configuration
screen displays.
2
On the left-hand side of the screen, click
Security
.
3 From the drop-down list next to
Select User Type
, select
Operator 1
,
Operator 2
,
Administrator 1
or
Administrator 2
.
4 In the
Username
field, enter a user name.
5 In the
Password
field, enter the new password.
6 In the
Verify Password
field, re-enter the same new password.