Ford 2012 F-150 Owner'S Manual Download Page 24

Page: 24 / 476

COURTESY WIPE

This feature allows for an extra swipe of the wipers after a wipe/wash
cycle.

Press the RESET button to turn it on or off.

EASY ENTRY

This feature automatically moves the driver’s seat backwards for easy
exit/entry from the vehicle.

Press the RESET button to turn the easy entry/exit seat on or off.

REAR PARK AID (if equipped)

This feature sounds a tone to warn the driver of obstacles near the rear
bumper, and functions only when R (Reverse) gear is selected.

Press the RESET button to turn the rear park aid on or off.

TRAILER SWAY (if equipped)

This feature uses the electronic stability control to mitigate trailer sway,

Press the RESET button to turn trailer sway on or off.

CREATE MYKEY / MYKEY SETUP / CLEAR MYKEY

For more information refer to

MyKey

威

in the

Locks and Security

chapter.

RESET FOR REMOTE START (if equipped)

Press RESET to choose:

•

Remote start on or off

•

Duration: 5, 10, 15 minutes

•

Remote start climate on or off

•

Remote start quiet on or off

LANGUAGE = ENGLISH / SPANISH / FRENCH

Allows you to choose which language the message center will display in.
Selectable languages are English, Spanish, or French.

Waiting four seconds or pressing the RESET button cycles the message
center through each of the language choices.

Press the RESET button to set the language choice.

System warnings

System warnings alert you to possible problems or malfunctions in your
vehicle’s operating systems.

Instrument Cluster

2012 F-150

(f12)

Owners Guide, 2nd Printing
USA

(fus)

Summary of Contents for 2012 F-150





























































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 F-150

Reviews:

Brands by name

Popular brands

Ford 2012 F-150, Owner'S Manual

Search results

Summary of Contents for 2012 F-150

Reviews:

Brands by name

Popular brands