Foma SH700i, Manual

Page: 61 / 588

59
Ca
lling
/Rec
e
ivi
n
g
Use the FOMA USB cable (sold separately) to connect hands-free devices for FOMA
terminal such as car navigation, and make/receive voice/video-phone calls from
device.
This is an optional function that will be available when compatible equipment is
released.
As of February 2005, compatible equipment has not been released.
Refer to the user’s guide of each product for more details.
Talking on FOMA terminal while driving is dangerous and may result in an accident.
※
Please set FOMA terminal to Drive mode or pull over to a safe place and use.
When receiving a voice call, verify using ring tone, picture light/called LED, vibrator, etc.
Hands-free
Using Handset in a Car
Note
Functions such as display settings and ring tones follow FOMA terminal settings for incoming calls.
If hands-free device has sound enabled, device plays ring tone even when FOMA terminal is set to Manner
mode or
Silent .
While in Drive mode, functions follow FOMA terminal settings for incoming calls.
When a video-phone call is made from the phonebook or Redial, transmission speed follows device
settings. When speed is not set, video-phone calls are made at 64K.
When video-phone calls are made or received, substitute image is sent to the other party.
When FOMA terminal sound is enabled while connected to a device, Close operation is followed if handset
is closed during a call. If device sound is enabled, call continues when FOMA terminal is closed regardless
of Close operation.
Record message settings are followed even when handset is connected to the device.
Some handset functions may not be available depending on device characteristics and specifications.
Answering Calls
1 When a voice call is received, the ring tone sounds and the picture
light/called LED flashes.
When name and
still picture are
saved in the
phonebook
Sub display
When caller ID is received
The phone number appears on the screen. If the other party’s name and phone
number are saved in the phonebook, they appear on the screen.
When Picture call is set
When a still picture or movie/i-motion is saved in the phonebook (
n
P. 96), the
name, phone number and image appear on the screen. However, they do not
appear if the caller does not send caller ID.
If caller ID is not received
Depending on the reason, one of the following messages appear.
User unset : When the caller wishes to withhold caller ID
Payphone : When the call is made from a payphone
Not support : When the call is received from abroad or from a landline phone
via international forwarding service that does not support caller ID
(Depending on the phone company, caller ID may appear.)
When FOMA terminal is closed
Check with the sub display. (Up to five double-byte characters appear at once.
For six or more characters, press
g
(
@
) to scroll.)
To stop the ring tone (Quick silent)
While receiving a call, press
#
or press
t
for 1+ seconds.
dv22̲e.book Page 59 Monday, February 14, 2005 4:58 PM