Foma SH700i, Manual

Page: 49 / 588

47
Be
fore
Us
in
g the
FOM
A
T
e
rm
in
a
l
Display your number (caller ID) on the other party’s phone (display) when making a
voice/video-phone call.
Caller ID is important personal information. Be very careful about your caller ID setting.
Set whether or not to send your caller ID using the methods below.
Specifications made when making a call take priority over the Notify caller ID setting. If no specifications are
made when a call is made, the Notify caller ID setting is followed.
It is possible to check your own phone number (Own number).
3 Press
t
.
The date and time are set.
Press
H
and stand-by reappears.
Note
Times appear in 24-hour format.
Set date and time from 00:00 January 1, 2000 to 23:59 December 31, 2099.
The date and time that are set are saved even if the battery pack is removed, but if the battery pack
remains removed or is empty for over one month, the settings may be reset. When this happens, set again
after charging the battery.
If the date and time are not set correctly, dates are not correctly recorded for Redial, Received calls,
Record message (voice/video-phone calls), and camera image titles/shooting dates. In addition, functions
that use the clock, such as Auto power ON/OFF, Alarm, Schedule, SSL (authentication), i-
α
ppli Auto start
or starting i-
α
ppli DX cannot be used correctly.
When date and time settings are reset, Auto disable for Manner mode is disabled.
Notify Caller ID
Default setting
Do not notify
Sending Your Own Phone Number to the Other Party
Method Notify caller ID Do not notify caller ID
Setting up in advance Notify caller ID (
n
P. 459) Set Yes Set No
Setting up when making
a call Add 186/
b
31#/184/#31# before the
phone number
Add 186/
b
31# Add 184/#31#
Enter the phone number and select
a sub menu (
n
P. 53)
Press
C3
[Send
own no.]
Press
C2
[No
caller ID]
Note
If you hear guidance requesting that the caller ID be sent, first make the Notify caller ID setting and then call again.
The Notify caller ID function appears only on compatible phone devices.
Own Number
Checking Your Phone Number
1
In stand-by, press
t0
.
Alternatively, select
_
(Settings)
→
Own number from Top menu.
Your phone number appears.
During a call, press
t0
.
If phone PIM is locked, Security code? appears. Enter the terminal security
code (four to eight digits) and press
t
.
To check personal information other than your phone number, press
t
[Details], enter the current terminal security code (four to eight digits) and
press
t
.
Refer to P. 434 for details on saving or changing owner information.
dv22̲e.book Page 47 Monday, February 14, 2005 4:58 PM