Foma SH700i, Manual

Page: 509 / 588

507
Da
ta
Com
m
uni
c
a
tio
n
J
Command name: +CGEQREQ= [parameter]
Overview
Sets QoS (Quality of Service) required of the network when establishing PPP packet transmission.
The command execution example below describes the setting pattern which is also set as the initial
setting.
Not stored in FOMA terminal’s memory using AT&W commands. Not reset with AT&F or ATZ commands.
Syntax
AT+CGEQREQ=[<cid>]
o
Parameter description
This setting is assigned to each cid by default value.
<cid>
*
: 1 to 10
<cid> is a number for managing hosts (APNs) used for packet transmission, registered in the FOMA
terminal. It can be set between 1 and 10 in the FOMA.
Command when requesting connection at uplink speed of 64 kbps, or downlink speed of
384 kbps
Execution example
for <cid>=3
AT+CGEQREQ=3
o
OK
Operation when parameter is omitted
AT+CGEQREQ=
Returns all <cid> settings to default settings.
AT+CGEQREQ=<cid>
Returns specified <cid> setting to default setting.
AT+CGEQREQ=?
Displays list of values that can be set.
AT+CGEQREQ?
Displays current settings.
J
Result codes
Result Codes
Numerical Display Text Display Meaning
0 OK Successfully executed.
1 CONNECT Connected to number dialed.
2 RING Call detected.
3 NO CARRIER Line disconnected.
4 ERROR Command not accepted.
6 NO DIAL TONE No dial tone detected.
7 BUSY Detecting busy tone.
8 NO ANSWER Connection completed. The server connection timed out.
100 RESTRICTION Network restricted.
101 DELAYED Redial restricted.
dv22̲e.book Page 507 Monday, February 14, 2005 4:58 PM