Foma SH700i Page 119 Manual Download

Page: 119 / 588

117

Sou

nd/Sc

reen

/Ligh

t Setti

ngs

Set Vibrator to notify incoming calls/mail and alarms with a combination of vibration
and melody.

The vibrator pattern for alarms is the same as the pattern set for incoming calls/mail.

Vibration mode and volume settings are not linked. Set the volume to

Silent

to silence ring tones and alarm

tones. Set volume separately while Vibrator is set. (

P. 115, P. 411)

Also use vibration patterns set to melodies (

With melody

Vibrator

Default setting

Vibration mode: OFF
Mail vibration: OFF

Vibrating for Calls and Alarms

In stand-by, press

t131

Alternatively, select

(Settings)

→

Sound

→

Vibrator

→

Vibration mode

from Top menu.

Vibration mode screen appears.

To set Mail vibration

In stand-by, press

t132

Select vibration pattern and press

Vibrator is set and the FOMA terminal vibrates.

appears in stand-by. However, icon does not

appear if vibrator is set only for mail.

Vibration pattern is sampled if Pattern 1 to 3 is selected. (Picture light/Called LED flashes.)

Set the following patterns.

Note

Note that if Vibrator is set and FOMA terminal is left on a table, it may fall when a call is received.

FOMA terminal Vibrator settings are not reflected in Flash movies (

P. 227).

If Original manner mode vibrator is set to

and Vibrator is set to

OFF

while in Manner mode, Vibrator

operates in

Pattern 1

If GIF animation or Flash movie is set as stand-by,

does not appear until animation is finished.

Even if With melody is set, vibration is not in conjunction with the main melody.

OFF

Vibrator does not activate.

Pattern 1

Vibrates approximately 0.8 seconds

→

stops for approximately 0.8 seconds and

repeats.

Pattern 2

Vibrates for approximately 0.3 seconds

→

stops for approximately 0.3 seconds

→

vibrates for approximately 0.3 seconds

→

stops for approximately 1 second and

repeats.

Pattern 3

Continuous vibration

With melody

Vibrator and melody activate

(With melody)

for melodies created with vibration

settings added.

Melodies that do not have vibration settings vibrate in

Pattern 1

dv22̲e.book Page 117 Monday, February 14, 2005 4:58 PM

Summary of Contents for SH700i













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SH700i

Reviews:

Related manuals for SH700i

Brands by name

Popular brands

Foma SH700i, Manual

Search results

Summary of Contents for SH700i

Reviews:

Related manuals for SH700i

Brands by name

Popular brands