Foma SH700i Manual Download Page 394

Page: 394 / 588

392

※

miniSD Memory Cards are sold separately. (

P. 369)

Dis

lay
ing
/Editin

/M
ana

ing Data

Use the Ir exchange function (

P. 388) from running software. Activating i-

ppli

from Ir exchange is also possible.

While in Self mode, Ir exchange is not available.

While i-

ppli PIM is locked, i-

ppli will not activate.

During Ir exchange, if a signal to start i-

ppli is received from devices supporting infrared

communication, software can be activated.

When i-

ppli To is set to

, i-

ppli will not activate from Ir exchange.

Cannot be activated as an i-

ppli stand-by.

Ready sender’s FOMA terminal to send all data.

Remember the authentication password entered in the sender’s FOMA.

Authentication password entry screen appears.

Enter the same authentication password (four digits) entered on
sender’s FOMA terminal.

Data is automatically received when data is sent from the other FOMA terminal within 30 seconds.

To cancel Receive all after entering authentication password, press

[Cancel].

Select

Yes

and press

To not overwrite

Select

and press

Note

When all bookmarks are received, they appear in the order used, starting from the oldest.

Using Ir Exchange with i-

ppli Software

Activating Ir Exchange from i-

ppli

While running software, start Ir exchange.

Procedures for starting Ir exchange differ, depending on the software.

Send Ir data confirmation screen appears.

Select

Yes

and press

Ir exchange begins.

To cancel operation

Select

and press

To cancel Ir exchange

While

Exchanging data

appears, select

Cancel

and press

Activating i-

ppli from Ir Exchange

In stand-by, press

t821

The FOMA terminal waits to receive data. Refer to step 1 of “Receiving Single Data Item <Receive Ir
Data>” on P. 390 .

Software is activated when signal is received from the sender’s
FOMA terminal.

Note

If applicable software is not installed in the i-

ppli startup setting,

No requested software

appears.

dv22̲e.book Page 392 Monday, February 14, 2005 4:58 PM

Summary of Contents for SH700i













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SH700i

Reviews:

Related manuals for SH700i

Brands by name

Popular brands

Foma SH700i, Manual

Search results

Summary of Contents for SH700i

Reviews:

Related manuals for SH700i

Brands by name

Popular brands