Foma SH700i, Manual

Page: 504 / 588

502
Da
ta
Com
m
uni
c
a
tio
n
AT+GMM
[M]
Displays abbreviated FOMA
terminal product name
(FOMA SH700i) in
alphanumeric characters.
*2
―
AT+GMM
o
FOMA SH700i
OK
AT+GMR
[M]
Displays FOMA terminal
version.
*2
—
AT+GMR
o
Ver1.00
OK
AT+IFC=<n,m>
[M]
Sets local flow control format
between the PC and FOMA
terminal.
*1
DCE by DTE (<n>)
0: No flow control
1: XON/XOFF flow control
2: RS/CS (RTS/CTS) flow control (default
setting)
DTE by DCE (<m>)
0: No flow control
1: XON/XOFF flow control
2: RS/CS (RTS/CTS) flow control (default
setting)
AT+IFC=2,2
o
OK
AT+WS46=<n>
[M]
Sets wireless network used to
call. Incoming signals are not
affected.
*1
n=22: FOMA network (fixed value) AT+WS46=22
o
OK
A/
[M]
Used when re-executing the
preceding command
executed.
*2
―
A/
OK
ATA
[M]
Enter during packet reception
and 64K data communications
to perform incoming
processes.
*2
Enter “ATA184
o
” (anonymous call reception
actions) or “ATA186
o
” (identified call
receiving actions) while receiving packets.
RING
ATA
o
CONNECT
ATD
[M]
Establishes
communication.
*2, *3
Packet transmission
ATD
*
99
***
<cid>#
o
When “ATD
*
99#” is entered:
Uses <cid>=1 (default setting). When <cid>
is not entered, setting becomes “<cid>=1”.
When syntax starting with
“ATD184
*
99
***
<cid>#” is entered:
“184” is added to host (APN) defined by
specified <cid>. Alternatively, “186” can
be added by same operation to turn caller
ID sending to ON.
64K data communications ATD
[parameter] [phone number]
o
ATD
*
99
***
1#
o
CONNECT
ATE<n>
[M]
Sets whether the FOMA
terminal returns echo of AT
commands sent from the
PC.
*1
n=0: Do not return echo
n=1: Return echo (default setting)
Normally set to n=1. If the PC has an echo
function, set to n=0. ATE1
o
OK
ATH
[M]
Disconnects line when
entered during packet
transmission or 64K data
communications.
*2
―
(During
communication)
+++
OK
ATH
o
NO CARRIER
AT Command Overview Parameter/Explanation
Execution
Example
Number cannot be dialed if characters
other than 0 to 9,
*
, #, A, a, B, b, C, c, D, d,
hyphen (-), spaces, T, t, P, p, !, W, w, @, or
commas (,) are included. Characters
highlighted with
can be entered but
are ignored during dialing.
dv22̲e.book Page 502 Monday, February 14, 2005 4:58 PM