Foma SH700i Page 19 Manual Download

Page: 19 / 588

Tab

le o
f Conte

ts/
P

ca
utions

Handling the FOMA Card

Warning

Never place the FOMA card inside a microwave oven or pressure cooker.

May cause melting, overheating, smoke emission, lost data, or malfunctions.

Caution

Use the FOMA card only in equipment
specified by DoCoMo.

Be careful when detaching the FOMA card
(IC).

Using other equipment may cause data
loss or malfunctions. For more
information regarding designated
equipment, contact a DoCoMo retailer.

May cause injuries to your hand or
fingers.

Do not touch the IC haphazardly, or short
the IC.

May cause data loss or malfunctions.

Keep the FOMA card out of the reach of
young children.

Do not drop or otherwise subject the FOMA
card to severe impact.

A small child may swallow or suffer
other bodily injury.

May cause a malfunction.

Never bend or place a heavy weight on the
FOMA card.

Do not damage the IC.

May cause a malfunction.

Do not heat or burn the FOMA card.

Do not store the FOMA card in a dusty
location.

May cause melting, overheating, smoke
emission, lost data, or malfunctions.

May cause a malfunction.

Do not store the FOMA card in direct
sunlight, high temperatures, or high
humidity.

Do not use or leave the FOMA card near
open flames, heaters, or other high
temperature locations.

May cause a malfunction.

May cause melting, overheating, smoke
emission, lost data, or malfunctions.

Do not get the FOMA card wet.

Do not disassemble or modify the FOMA
card.

Contact with liquids such as water or
pet urine may cause malfunctions.

May cause data loss or malfunctions.

dv22̲e.book Page 17 Monday, February 14, 2005 4:58 PM

Summary of Contents for SH700i













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SH700i

Reviews:

Related manuals for SH700i

Brands by name

Popular brands

Foma SH700i, Manual

Search results

Summary of Contents for SH700i

Reviews:

Related manuals for SH700i

Brands by name

Popular brands