67
Ca
lling
/Rec
e
ivi
n
g
J
When Caller ID Request Service is set to
Activate
while Drive mode is set
When a voice call is received that is User unset, the call is not connected and is not saved in
Received calls. When a voice call that is not User unset or a video-phone call is received, the
ring tone does not play but the call is saved in Received calls.
Callers with no caller ID hear a message indicating that Caller ID Request is enabled and the voice call is
disconnected. Callers with caller ID hear a message indicating that Drive mode is enabled and the voice call is
disconnected.
When a video-phone call is received,
Driving mode
appears on the caller’s screen and the call is disconnected.
J
When a call is received from a number registered in the Nuisance Call
Barring Service while Drive mode is set
When a voice/video-phone call is received, the call does not connect and the number is not
saved in Received calls.
When a voice call is received, the caller hears a message indicating that the call is rejected and the call is
disconnected.
When a video-phone call is received,
Failed to connect
appears on the caller’s screen and the call is disconnected.
If incoming call is not answered,
Missed call
and number of missed
calls appear in stand-by (Missed calls display).
When missed calls are checked, or
c
is pressed for 1+ seconds,
Missed call
disappears.
When the FOMA terminal is closed and
g
(
@
) is pressed for 1+ seconds,
Missed
calls
disappears.
Note
This function cannot be used during data or fax transmissions.
Refer to P. 452 for Voice Mail Service, P. 456 for Call Forwarding Service, P. 455 for Call Waiting Service,
P. 460 for Caller ID Request Service and P. 459 for Nuisance Call Barring Service.
Remote lock all is available even while in Drive mode. Disconnect after Drive mode message starts. When
set, beeping tone indicating All lock is played instead of Drive mode guidance.
If GIF animation or Flash movie is set as stand-by display,
_
does not appear until animation is finished.
Drive mode takes priority over Manner mode.
If alarm time arrives while in Drive mode, alarm does not sound. Picture light and vibrator also do not activate.
Missed Calls
Checking Missed Calls
1
When
Missed call
appears in stand-by, press
t
.
Received calls appears.
D
appears next to missed calls.
Press
q
(
M
) to also check Received calls. (
n
P. 62)
2
Select phone number and press
t
.
Missed call details appear.
Use the same operations as Received calls to make calls and check other entries in Received calls.
Note
When a call is received from a caller using Dial-in, a number different from the caller’s Dial-in number may appear.
Calls cannot be checked while All lock (
n
P. 146) is enabled.
dv22̲e.book Page 67 Monday, February 14, 2005 4:58 PM
Summary of Contents for SH700i
Page 50: ...LMEMO9 48 dv22 e book Page 48 Monday February 14 2005 4 58 PM ...
Page 92: ...LMEMO9 90 dv22 e book Page 90 Monday February 14 2005 4 58 PM ...
Page 244: ...LMEMO9 242 dv22 e book Page 242 Monday February 14 2005 4 58 PM ...
Page 581: ...LMEMO9 579 dv22 e book Page 579 Monday February 14 2005 4 58 PM ...