Foma SH700i, Manual

Page: 466 / 588

464
Ne
tw
o
rk
Se
rv
ic
e
s
Set arrival actions to Activate to activate
settings made in Arrival call actions
(
n
P. 463).
Manually connect incoming voice calls to Voice Mail
Service or Call Forwarding Service.
Activate/Deactivate/Check for arrival actions settings
are not available from outside the service area.
The default setting is Deactivate .
Set Voice Mail Service and Call Forwarding
Service remotely from landline phones and
NTT payphones. Remote control is also
available from outside the FOMA service area.
To perform remote operations, set Remote
control to
Activate in advance.
Activate/Deactivate/Check for remote control settings
are not available from outside the service area.
Refer to “Network Services Operation Guide” for details.
Set to activate remote control.
Set to deactivate remote control.
Set Arrival Act
Activating/Deactivating
Arrival Actions
Activating Arrival Actions <Activate>
1
In stand-by, press
t481
.
Alternatively, select
_
(Settings)
→
Services
→
Set arrival act
→
Activate from Top menu.
Activate confirmation screen appears.
2 Select Yes and press
t
.
Arrival action is activated and message
appears.
To not activate
Select No and press
t
.
Deactivating Arrival Actions
<Deactivate>
1
In stand-by, press
t482
.
Alternatively, select
_
(Settings)
→
Services
→
Set arrival act
→
Deactivate from Top
menu.
Deactivate confirmation screen appears.
2
Select Yes and press
t
.
Arrival action is deactivated and message
appears.
To not deactivate
Select No and press
t
.
Confirming Settings
<Status Request>
1 In stand-by, press
t483
.
Alternatively, select
_
(Settings)
→
Services
→
Set arrival act
→
Status request from Top
menu.
Current settings appear.
Remote Control
Setting Remote Control
Activating Remote Control <Activate>
1 In stand-by, press
t401
.
Alternatively, select
_
(Settings)
→
Services
→
Remote control
→
Activate from Top
menu.
Activate confirmation screen appears.
2 Select Yes and press
t
.
Remote control is activated and message
appears.
To not activate
Select No and press
t
.
Deactivating Remote Control
<Deactivate>
1 In stand-by, press
t402
.
Alternatively, select
_
(Settings)
→
Services
→
Remote control
→
Deactivate from Top menu.
Deactivate confirmation screen appears.
2 Select Yes and press
t
.
Remote control is deactivated and message
appears.
To not deactivate
Select No and press
t
.
Confirming Settings <Status Request>
1
In stand-by, press
t403
.
Alternatively, select
_
(Settings)
→
Services
→
Remote control
→
Status request from
Top menu.
Current settings appear.
dv22̲e.book Page 464 Monday, February 14, 2005 4:58 PM