Foma SH700i Page 145 Manual Download

Page: 145 / 588

143

Sec

rity Se

tting

Entering PIN code when power is turned on

Set PIN code input set to

and PIN code entry screen appears when the power is turned on.

Enter PIN code to operate FOMA terminal. Prevents unauthorized use of the handset.

Change PIN/PIN2 codes.

Press

(Power) for 2+ seconds to turn on handset.

Rest 3 times

appears.

Enter PIN code (four to eight digits) and press

Enter PIN code up to three times.

Entered PIN code is masked with asterisks.

Enter correct PIN code to proceed to stand-by.

Note

In PIN code entry screen, PIN code is locked if incorrectly entered three times. Disable PIN lock.
Enter new PIN code while unlocked. (

P. 144)

Changing PIN/PIN2 Codes
<Change PIN Code/Change PIN2 Code>

Default setting

PIN code: 0000

PIN2 code: 0000

In stand-by, press

t62

, enter terminal security code (four to

eight digits) and press

Numbers are masked with asterisks.

FOMA card (UIM) settings screen appears.

When PIN code input setting is set to

OFF

, the PIN code cannot be changed.

Press

[Change PIN code].

Rest 3 times

appears. Enter PIN/PIN2 code up to three times.

To change PIN2 code

Press

Enter PIN/PIN2 code (four to eight digits) and press

Entered PIN/PIN2 codes are masked with asterisks.

Enter new PIN/PIN2 code (four to eight digits) and press

Entered PIN/PIN2 codes are masked with asterisks.

Enter the new PIN/PIN2 code (four to eight digits) again and
press

Changed

appears.

Note

In PIN code/PIN2 code entry screen, PIN/PIN2 codes are locked if incorrectly entered three times. Disable
PIN lock (

P. 144). New PIN/PIN2 codes must be entered while unlocked.

dv22̲e.book Page 143 Monday, February 14, 2005 4:58 PM

Summary of Contents for SH700i













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SH700i

Reviews:

Related manuals for SH700i

Brands by name

Popular brands

Foma SH700i, Manual

Search results

Summary of Contents for SH700i

Reviews:

Related manuals for SH700i

Brands by name

Popular brands