6 Mounting
6.3 Temperature probe
FLUXUS G831ST-HT
2021-06-01, UMFLUXUS_G831ST-HTV1-0EN
48
6.3.2.3
Installation with quick release clasp
• Cut the tension strap to length (pipe circumf at least 120 mm).
• Position the temperature probe on the pipe (see Fig. 6.44).
• Place the tension strap around the temperature probe and the pipe.
• Insert the tension strap into the clasp.
• Tighten the tension strap.
• Tighten the screw of the clasp.
Caution!
The edge of the tension strap is very sharp.
Risk of injury!
→ Debur sharp edges.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
Fig. 6.46: Quick release clasp
