18 Settings
FLUXUS G831ST-HT
18.1 Dialogs and menus
133
UMFLUXUS_G831ST-HTV1-0EN, 2021-06-01
Measuring point number
• Select the menu item
Measuring point no.
.
• Select
Number
if the measuring point number should only consist of numeric characters. Select
Text
if the measuring
point number should only consist of alphabetic characters.
• Press ENTER.
Error delay
The error delay is the time after which an error value will be sent to an output if no valid measured values are available.
• Select the menu item
Error value delay
.
• Select
Edit
to enter an error delay. Select
Damping
if the damping factor is to be used as the error delay.
• Press ENTER.
Transducer distance
• Select the menu item
Transducer distance
.
• Select
Customized
if the measuring point is always the same. Select
Automatic
if the measuring point often changes.
• Press ENTER.
In the program branch
Measurement
, the recommended transducer distance will be displayed in parenthesis, below the
entered transducer distance.
Display of the last value
• Select the menu item
Display last value
.
• Select
Yes
to display the last valid value.
If
Yes
is selected and no valid measured value can be displayed during the measurement, the channel will display the last
valid value. Behind this value an interrogation point will be displayed.
Switching off the display backlight
• Select
Yes
to activate the automatic switch-off.
• Press ENTER.
If the automatic switch-off of the display backlight is activated, the backlight is switched off after about 30 s. When
pressing a key or connecting a USB cable, the backlight is switched on again.
Special functions\Dialogs/Menus\Measuring point no.
Special functions\Dialogs/Menus\Error value delay
Special functions\Dialogs/Menus\Transducer distance
Special functions\Dialogs/Menus\Display last value
Special functions\Dialogs/Menus\Light autom. off
