14 Inputs
FLUXUS G831ST-HT
14.1 Configuration of an input
111
UMFLUXUS_G831ST-HTV1-0EN, 2021-06-01
14
Inputs
The inputs are configured in the program branch
Special functions
and assigned to the individual measuring
channels in the program branch
Options
.
14.1
Configuration of an input
If the transmitter is equipped with inputs, they have to be
configured.
• Select the program branch
Special functions
.
• Press ENTER.
• Select the input to be configured.
• Press ENTER.
The scroll list contains all available inputs.
• Select a list item:
– Current Ix (-)
– Temperature Tx (-)
If the input has already been configured, it is displayed as follows:
Current
I1(
)
.
Enabling the input
To use the input, it has to be enabled.
• Select
Yes
to enable an input or change the settings for an already enabled input.
• Select
No
to uninstall an already configured input and to return to the previous menu item.
• Press ENTER.
14.1.1
Temperature inputs
When configuring the temperature input, the temperature probe can now be selected.
Selection of the temperature probe
• Select the temperature probe:
– Pt100
– Pt1000
Activation of the temperature correction
A temperature correction (offset) can be set for each temperature input. This function is activated in the menu item
Special version\Dialogs/Menus
.
• Select
Yes
to activate the temperature correction. Select
No
to deactivate it.
• Press ENTER.
Special functions
Inputs
→ Current Ix
→ Temperature Tx
see annex A
Special functions\Inputs
Special functions\Inputs\Current I1\Enable I1
Special functions\Inputs\Temperature Tx\Pt100/Pt1000
Special functions\Dialogs/Menus\Tx temperature offset
Notice!
The entered correction value for each temperature input will be stored and displayed when the temperature
correction is activated again.
