12 Dismounting and disposal
12.1 Dismounting
FLUXUS G831ST-HT
2021-06-01, UMFLUXUS_G831ST-HTV1-0EN
102
12
Dismounting and disposal
12.1
Dismounting
The dismounting is carried out in reverse order to the installation.
12.2
Disposal
The measuring equipment has to be disposed of in accordance with the applicable regulations.
Danger!
Risk of explosion when using the measuring equipment in explosive atmospheres (ATEX, IECEx)
This may result in personal or material damage or dangerous situations.
→ Observe the "Safety instructions for the use in explosive atmospheres" (see document SIFLUXUS).
Warning!
Installation, connection and start-up by unauthorized and unqualified personnel
This may result in personal or material damage or dangerous situations.
→ Any work on the transmitter has to be carried out by authorized and qualified personnel.
Danger!
Working in mines or cramped confines
Risk of intoxication and/or asphyxiation because of emerging gases, risk of injuries because of cramped
conditions.
→ Wear the required personal protective equipment.
→ Observe the applicable rules.
Warning!
Touching live parts
Electric shock or arc faults can led to severe injuries. The measuring equipment can be damaged.
→ Prior to any work on the transmitter (e.g., installation, dismounting, connection, start-up), the
transmitter has to be disconnected from the power supply.
Caution!
Safety and accident prevention regulations for electrical systems and equipment
Failure to observe these regulations may lead to severe injuries.
→ Observe the safety and accident prevention regulations for electrical systems and equipment.
Important!
Avoiding environmental damage by correct disposal of components
Depending on the material, the corresponding parts have to be disposed of in residual or special waste or recycled.
FLEXIM accepts the return of the components. For further information, contact FLEXIM.
